 |
Pete checks the oil on the Chicago & Northern Illinois HO layout (now gone). |
 |
I like to draw bungalows as well as build models of them. This is a graphite work. |
 |
A modified BJ Traction car dealer kit (O scale). |
 |
A storefront made for a client who wanted me to copy the postcard picture (O scale). |
 |
A scene from my 1980s HO layout "CB&Q Southside Division". I painted the S2. |
 |
A wooden O scale warehouse for a client. Basswood with 3D printed windows. Sits on a triangular lot. Stained first with oak, then driftwood to give it a somewhat aged appearance. |
 |
Custom buildings and signs for a client's O scale "EL" diorama - downtown Chicago in 1950. |
 |
Industrial corridor on my past S scale layout. |
 |
One of the scratch-built flats for the "EL" diorama. |
 |
S scale. "Cicero 2-Flat" front based buildings. The fronts were the product, the side and back walls I made for my own use. The corner drug store was a full building kit. |
 |
O scale factory for a client made from DPM modular walls, a Heljan stack and some scratchbuilt parts. |
 |
An abandoned weld shop diorama in HO (DPM model). Lettering was masked and sprayed. Not the loose chimney brick on the roof - chimney was 3D printed. |
 |
A scene from a 1x4 ft. N scale operating diorama. Appeared in N-Scale magazine February 1993. |
 |
Corner drug store in O made from card and basswood strips. Brick is colored pencil rubbed over gray paper laid on plastic brick sheet. Concrete edges are made by stripping and gluing the outer layer of mat board to the laminated part edges. |
 |
A modified HO DPM kit with custom storefront and sign. |
 |
Dawn at Rich's Phillips 66 station. On my HO traction microlayout. Named for my late father-in-law. Started as a small barn kit. |
 |
I scratch-built these for the Reid brothers' N scale layout many years ago. |
 |
Scratch-built O scale gate tower with full interior and lighting. Basswood with 3D printed windows and details. |
 |
A 1:1200 scale seaport diorama built for a travel agency. |
 |
Scratchbuilt O scale hotel for an On30 client. Basswood with 3D printed windows & doors. |
 |
Two O scale BJ Traction kits. I modified the theatre with a vault face, new marquee and new sign. Lighting (sign and chase lights) done by Larry Konsbruck. |
 |
O scale Jewel made mostly from card with basswood windows and skeleton. Signs are hand made. See my Dave Lull Studios gallery for my Jewel relief kit. |
 |
White Tower restaurant custom built for a client in O scale. |
 |
A scene reminiscent of Berwyn Il near where I was born. A pic from my former S scale layout. |
 |
Cincinnati Union Terminal building custom built in O scale for a hi-rail client. |
 |
An S scale factory in urethane. Brick parts were made by Don Ledger (former owner of Timber Products). |
| |
|
|
|
| |
|
|
|
Copyright© 1993 - 2025 DSL Shops. All rights reserved.
